RG-RSR30-XA-24 24-Port Multi-service Fixed Aggregation Router

Recommended as an egress router for networks of public sector commission offices, government at the district and county levels.

Highlight Features
  • Self-developed next-generation RGOS12.X and innovative architecture, providing high performance and scalability and enabling non-blocking concurrent services
  • Dual redundancy for software and hardware and high system reliability, providing nonstop services
  • Comprehensive HQoS policy, enabling fine-grained traffic management and improving network experience of VIP users
Features

24-Port High-Density 10GE Fixed Aggregation Router
RG-RSR30-XA-24

The router provides multiple WAN ports and integrates routing, security, wireless and other functions. The router is recommended as an egress router for networks of public sector commission offices, government at the district and county levels, and small and medium-sized parks, and as an aggregation router for networks of small and medium-sized enterprises.
The next-generation HSIC expansion module is supported and rich expansion modules are provided to meet various combination requirements.

Ports

Applications

Next-Generation Operating System RGOS and Innovative Architecture,Providing High-Performance and Scalability and Enabling Non-Blocking Concurrent Services

The innovative architecture combines the CPU, network chip, and service-specific chip to accelerate hardware performance, while enabling unified business scheduling. The independent operation of each business component ensures that a single business malfunction will not affect the normal operation of the entire machine.

Dual Redundancy for Software and Hardware and High System Reliability, Providing Nonstop Services

Software-Level Dual-Boot

Hardware-Level Redundancy & Hot Swapping

Two flash chips are used to store the boot software, enabling dual-boot file redundancy and automatic operating system backup. This prevents device startup failure caused by flash chip malfunction, ensuring smooth services

Comprehensive HQoS Policy, Enabling Fine-Grained Traffic Management and Improving Network Experience of VIP Users

A Hierarchical Quality of Service (HQoS) policy uses multi-level queues to implement multiple scheduling, which differentiates traffic from different users and services. This ensures that higher priorities and guaranteed bandwidth are allocated to key users and services. In this way, HQoS achieves more precise traffic management than traditional QoS, thereby enhancing the network experience for VIP users.

QoS queue-based traffic scheduling

HQoS multi-level queue-based traffic scheduling

Specifications

Hardware Specifications

Hardware Specifications RG-RSR30-XA-24
Interface Specifications
Fixed WAN port 8 x 10GE optical ports

16 x GE electrical ports

Power modules 2 redundant power modules (hot swapping)
Fixed management ports 1 x console port, 1 x USB 2.0 port
Expansion slot 4
System Specifications
Switching capacity 10 Gbps
ARP table size 24,000
Number of IPv4 unicast routes 300,000
Number of IPv4 multicast routes 2,048
Number of IPv6 unicast routes 300,000
Number of IPv6 multicast routes 1,024
Number of IGMP groups 1,000
Number of MLD groups 1,000
Number of ACEs Ingress: 16,000

Egress: 16,000

Dimensions and Weight
Dimensions (W x D x H) 440 mm x 420 mm x 44 mm (17.32 inch. x 16.56 in. x 1.73 in.), 1 RU
Weight (full configuration) < 7.8 kg (17.20 lbs) (excluding packaging)
Power and Consumption
Maximum power consumption < 150 W
Maximum output power RG-PA150IB-F: 150 W @ 10 A power cord
Rated input voltage RG-PA150IB-F: 100 V AC to 240 V AC, 50 Hz to 60 Hz
Maximum input voltage RG-PA150IB-F: 90 V AC to 264 V AC, 47Hz~63Hz
Environment and Reliability
MTBF > 100,000 hours
Operating temperature 0°C to 50°C (32°F to 122°F)
Storage temperature –40°C to +70°C (–40°F to +158°F)
Operating humidity 10% to 90% RH (non-condensing)
Storage humidity 5% to 95% RH (non-condensing)
Interface surge protection 6 kV
Operating altitude 0–3000 m (0–9,842.52 ft.)


Software Specifications

RG-RSR30-XA Series
Model Description
Ethernet switching Jumbo frame length: 1578 bytes
802.3az EEE
LLDP/LLDP-MED
IP service Static and dynamic ARP
DHCP server, DHCP relay, and DHCP client
FTP, TFTP, FTPv6, and TFTPv6
NTP, SNTP, and NTPv6
NAT
Strict and loose RPF

uRPF ignoring default routes

ND
DNS
IPv4/IPv6 VRF
DHCP server, DHCPv6 client, and DHCPv6 relay
ND and ND snooping
IPv6 GRE tunnel
IP routing IPv4 and IPv6 static routing, and static blackhole routes
RIP v1/v2 and RIPng
OSPFv2 and OSPFv3
IS-ISv4 and IS-ISv6
BGP and BGP4+
Routing policies
BGP4, BGP4+, and MP-BGP
IPv4 VRRP v2/v3 and IPv6 VRRP v3
IPv4 and IPv6 PBR
Multicast IGMP v1/v2/v3
Static multicast routing
PIM-DM, PIM-SM, PIM-SSM, PIM-SSMv6, PIM-SMv6, and other multicast routing protocols
MSDP for inter-domain multicast
MLDv1/v2
MPLS Basic MPLS functions
MPLS forwarding
6PE/6VPE interconnection with IPv4/IPv6 MPLS backbone network
MPLS MIB (RFC 1273, 4265, 4382)
L3VPN
LSP
LDP
ACL and QoS Standard IP ACLs
Extended IP ACLs
Extended MAC ACLs
IPv6 ACLs
Applying ACLs to interfaces
MPLS QoS
Security Multiple AAA modes
RADIUS authentication, authorization, and accounting
TACACS+
Attack defense
Password security
RNFP
CPP
FPM
PKI
IPsec VPN
VPDN
SSHv1 and SSHv2
Global IP-MAC binding
Login authentication and password security
Reliability BFD
GR
DLDP
ECMP
Hot swapping
NMS and maintenance SPAN and ERSPAN
SNMP v1/v2c/v3
System operation logging
IPFIX
Command line configuration through console, AUX Modem, Telnet, and SSH
RMON (1, 2, 3, 9)
NETCONF
CWMP
gRPC
Interface Ethernet interface, E1/CE1 interface, and 4G interface

Note: The item marked with the asterisk (*) will be available in the future.

Show More
ResourcesAll Resources
Learn about Products or Solutions
Installation
Software and Configuration
Order Information

Chassis

Model Description
RG-RSR30-XA-24 RG-RSR30-XA-24 chassis, 8 x 10GE optical WAN ports and 16 x GE electrical WAN ports, 4 x Expansion slots, 1 x USB 2.0 port, 1 x console port


Power Modules

Model Description
RG-PA150IB-F 150 W AC power module


Line Card

Model Description
HSIC-2E1/CE1 2-port E1/CE1 module (the cable needs to be purchased separately)
HSIC-4G-LTE-G 1-port full-mode 4G and encryption module (the antenna needs to be purchased separately)
*HSIC-5G-NR 1-port full-mode 5G and encryption module (the antenna needs to be purchased separately)
*HSIC-1POS-STM1 1-port OC-3c/STM-1c POS interface card (the optical module needs to be purchased separately)